D. S. Enterprises

Epillary - Epoxy Waterproof Materials

It is an epoxy based aqueous emulsion. Due to its low viscosity and low contact angles with substrates, it readily pen- etrates into porous concrete, tiles, bricks, granite, marble, plywood, MDF, fibre cement boards and other porous materials.

Subsequently the epoxy polymer coalesces and transforms to a solid through an irreversible ther- moset reaction, along with displacement of bound water.

USAGE:
It is a two part system and is supplied in pre-measured Part-A and Part-B bottles or jars.

To use just add all of Part-A into Part-B, mix well and apply using a paint roller brush.

Coverage

coverage is about 10 g/sft for most sur- faces and gives a 50 micron coating. If porosity is high, it will soak up more material. For highly porous materials, apply another coat of 10 g/sft, after the first coat has cured. The second coat can be applied within 1-4 hours of the first coat.

AVAILABLE IN TRANSPARENT AND COLOUR

EPOPLUG - Epoxy Waterproofing solutions


Sealing, joining, fixing and healing

Epoplug is avilable in white or any colour of your choice.

product to plug holes in concrete, especially on vertical walls. It is a solid dough like malleable mass, that can be pushed into holes and gaps. It bonds to damp surfaces and can stop flowing water.

EpoplugTM is a Part-A and Part-B system. It is kneaded by hand. It begins setting in 20 minutes and solidifies to a rigid mass in 30 minutes. 

It has a density of 0.5 g/cc, compared with about 2.5 g/cc for conventional epoxy plugs. For the same mass it can occupy a volume 5 times larger.